How to install the bottle blowing machine?

September 22, 2021

1. The layout of the machine

The layout of the machine in the workshop should meet the convenience of mold replacement and maintenance. Generally, leave a space of 1 to 1.5 meters around it, and there should be a distance of about 2 meters between the two machines.

2. Requirements for the installation base

In order to avoid vibration during work, the machine should be placed on a concrete foundation. The thickness of the foundation is ≥459mm, the concrete number is not less than 200#, and the level error of the foundation is 1/1000. The exposed part of the pit in the foundation should be prepared with a suitable cover plate (installed by the tunnel pipeline) to prevent accidents. The bearing capacity of the installation foundation shall not be less than 8MPa.

3. Installation sequence

Installation is divided into fixed installation and mobile installation.

1) Fixed installation is to transport the machine to the foundation level, install the anchor screws, adjust the level initially, and then pour concrete into the anchor holes, and then fine-tune the level after the concrete is dry. It can also be fixed directly on the foundation floor with expansion bolts. The tilt angle of the machine is not more than 3°

2) The method of fine adjustment of the level is to use a level to measure on the upper plane of the lock template and the dovetail groove of the pen holder. After the vertical and horizontal level is adjusted, the anchor screws are evenly tightened.

3) For mobile installation, the equipment can be moved at any time. Just place the anti-vibration pad (standard size, but not standard accessories of Leshan) on the empty position of the anchor bolt, use a level ruler on the upper edge of the template to correct the level, adjust the anti-vibration pad, and then tighten the nut. The tilt angle of the machine is not more than 3°.

The above is the How to install the bottle blowing machine? we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Maintenance of common faults of blow molding machine 1-6.

Next:The advantages and differences of automatic and semi-automatic blow molding machines