Industry Information

Update December 01, 2022

The overall production process of the bottle blowing machine

What is the overall production process of the bottle blowing machine? The definition of a PET blow molding machine is a production machine used to make bottles of different shapes and sizes. Its...

Update November 24, 2022

Ten Key Factors of Selction of the Hot Runner Nozzle for Preform Mold

Ten key factors of selection of the hot runner nozzle for preform mold In the production process, we often worry about what kind of hot runner nozzle to choose for the preform mold, and the factors...

Update October 31, 2022

Domestic bottle blowing machine products and levels are distributed in a pyramid

The data shows that there are nearly 1,000 professional blow molding machine manufacturers in the country, of which more than 300 are not stable enough. Nearly 10% of the companies annually change...

Update October 27, 2022

Solutions of common problems of PET blowing machine

Common trouble of PET bottle blowing machine and solutions as following: Fault 6: the bottom of the bottle is too thin Reasons: 1. Start blowing early 2. Bottom temperature is too high 3. The bottom...

Update October 24, 2022

Troubleshooting of PET bottle blowing machine

Common trouble of PET strech blowing machine and solutions as following: Fault 11: The bottom of the bottle is not full Reasons: 1. The temperature of bottle bottom is too high 2.The exhaust hole at...

Update October 13, 2022

Knowledge about PET bottle preform injection molding

What do you know about PET bottle preform injection molding? PET preform is a typical injection molding product, which is easy to transport, mostly made of plastic material, with uniform texture and...

Update October 12, 2022

How to Solve Common Problems of PET bottle blowing machine

Common trouble of PET stretch blowing machine as following: 1.Poor transparency of the PET bottle Reason: 1. Heating temperature is too high 2. Heating time is too long 3. Compressed air contains...

Update October 06, 2022

How To Choose The Preform Mold Correctly

The preform mold generally has a large number of cavities, and the product requirements are relatively high, otherwise the wall thickness of the blown bottle will be uneven. Know before choosing a...

Update September 28, 2022

Precautions In The PET Bottle Blow Molding Process

Precautions in the PET bottle blow molding process. The blow molding process is a two-way stretching process, in which the PET chains are extended, oriented and aligned in both directions, thereby...

Update September 26, 2022

The intelligentization and dataization of the blowing machine are unstoppable

With the rising demand for domestic plastic bottles market, the blow molding machine industry has also risen up. In recent years, the application of bottle blowing machines in beverages,...