Industry Information

Update November 06, 2021

How to solve common failures of injection molds?-part3

Injection mold is a tool for producing plastic products; it is also a tool for giving plastic products a complete structure and precise dimensions. The structure of the injection mold and the quality...

Update November 05, 2021

Common problems of blow molding-part 1

1. Black spots or black lines A small black substance or short black streaks on the surface of a transparent part or a transparent part of the part. Machine: 1. Stay in the barrel for too long. 2....

Update November 05, 2021

Which Is The Best Manufacturer Of Plastic Bottle Blowing Machine

With the improvement of the quality of life and the progress of science and technology, plastic bottles can be seen everywhere in our life, and are used in various industries. Plastic bottles are...

Update November 05, 2021

How to solve common failures of injection molds?-part2

Update November 04, 2021

Precautions For Use Of Automatic Bottle Blowing Machine

No preform on bottle blowing machine. Check whether there is bottle preforms in the bottle preform hopper. If not, add the bottle preforms.If yes, but the bottle preforms cannot be loaded...

Update November 04, 2021

How to solve common failures of injection molds?-part1

Update November 03, 2021

What are the technical points of the five-gallon bottle cap injection mold?

1. The product molding cycle is a very important factor, because it is related to their product production efficiency. Optimizing the mold structure design and cooling system is the key. 2. A good...

Update November 03, 2021

Common Faults and Aroubleshooting methods of Blow Molding Machine

Fault 1: PET bottle transparency is not good Reason: 1. The heating temperature is too high; 2. Heating time is too long; 3. Compressed air contains water; 4. The injection embryo tube itself is...

Update November 03, 2021

Operation Steps Of Automatic Bottle Blowing Machine

Check whether the physical environment and basic equipment environment meet the startup requirements. Including whether the power supply, pipeline, high and low pressure air compressors are all...

Update November 02, 2021

HDPE bottle injection blow molding characteristics

The characteristics of HDPE injection blow molding are as follows: 1. The plastic melt is injected into the parison mold, and it undergoes a certain orientation effect in the circumferential...