Industry Information

Update October 19, 2021

What Are The Pneumatic Devices On The Bottle Blowing Machine?

Pneumatic equipment is widely used in the operation of bottle blowing machine.From discharging, closing, drawing, high-pressure blowing, deflating and bottle taking, this series of actions are...

Update October 18, 2021

What Are The Main Blowing Procedures Of Bottle Blowing Machine?

What are the main blowing procedures of bottle blowing machine? There are six steps in the blowing procedure of bottle blowing machine.Please see below the details. 1) First, put the heated preform...

Update October 18, 2021

Fourteen common defects in bottle blowing, how many have you encountered?8-15

8, burst symptom: The bottom of the bottle or near the bottom of the bottle cracked, and some of the cracks were in the transition zone where the bottom of the bottle changed from thick to thin....

Update October 16, 2021

What are the requirements for cosmetic plastic bottles?

Generally there are PET plastic, PP plastic, PETG plastic. Ordinary cosmetics and detergent packaging containers are mostly made of high-density polyethylene. In order to meet the packaging...

Update October 16, 2021

One-step injection blow blow molding machine process flow and advantages and disadvantages

At present, the requirements for food packaging bottles, pharmaceutical packaging bottles, cosmetic packaging bottles, and some high-grade daily necessities packaging bottles are getting higher and...

Update October 16, 2021

The Operation Specifications Of Full Automatic Bottle Blowing Machine You Need To Know

What are the operation specifications of full automatic bottle blowing machine？Here are ten points we must know. Before start-up of each shift, each movable part must be lubricated once. The arm can...

Update October 15, 2021

How To Deal With Several Problems Often Encountered In The Use Of Bottle Blowing Machine?

Upper is thin and lower is thin. Shooting: Delay the pre blowing time, or reduce the pre blowing pressure and air flow. Lower is thicker than upper. Shooting: Advance the pre blowing time, or...

Update October 14, 2021

Fourteen common defects in bottle blowing, how many have you encountered?1-7

1. The bottom forming is not full (concave feet) symptom: The contour of the bottom of the petals is not ideal, especially the bottom corners are partially sunken. Although the underformed bottom has...

Update October 14, 2021

Precautions For Bottle Blowing Machine

You may be familiar with the bottle blowing machine. It is mainly used to blow bottles. It can blow plastic particles or softened liquid into bottles that people need through certain technological...

Update October 13, 2021

The difference between blow machine and injection machine

Blow molding machine: a machine that produces various plastic products by blowing plastic heating into a diaphragm or hollow space with wind. Such as plastic film, bottle, etc. Injection molding...