Industry Information

Update September 30, 2021

Common faults of injection molding machine

一. The oil pump motor and the oil pump start, but no pressure. 1. The wiring of the proportional valve on the oil pump is loose or the coil is burned out-check whether the proportional pressure valve...

Update September 30, 2021

The bottom of the bottle blown by the bottle blowing machine is not shaped? Pay attention to these four points.

The bottle blowing machine is mainly used to blow the bottle preforms. Many users feedback that the bottom of the bottle from the bottle blowing machine is not formed. There are many reasons for the...

Update September 29, 2021

What should users pay attention to when operating and maintaining PET bottle blowing machines?

In recent years, with the rapid development of the domestic plastic bottle market, the plastic bottle blowing machine industry has ushered in a development opportunity. The blow molding machine is...

Update September 28, 2021

How to adjust the temperature of automatic bottle blowing machine

In the process of automatic bottle blowing machine, we must pay attention to some temperature control to ensure the proper plastic bottle. 1. Melting temperature (TM): for crystalline polymers, it...

Update September 28, 2021

Blowing principle and process of automatic bottle blowing machine.

Bottle blowing machine refers to a machine that blows bottles. The simple explanation is a machine that can blow plastic particles (softened into liquid) or finished preforms into bottles through...

Update September 27, 2021

Features of PET bottle blowing machine.

The drying tunnel is separated from the bottle blowing platform, which reduces the time for mold opening, improves the blowing efficiency, and increases the output at the same time. 1. The compact...

Update September 25, 2021

What are the factors affecting the extrusion blow molding process?

1. Extrusion temperature Controlling the temperature of the extruder is the most important point in the process factors of extrusion blow molding! The adjustment of the extrusion temperature is...

Update September 25, 2021

How to maintain the bottle blowing machine?

1. Before turning on the plastic bottle blowing machine in each shift, it is necessary to add lubricating oil to each movable part once. (Manipulator, manipulator guide rail, mold opening and closing...

Update September 24, 2021

How To Use Blow Molding Machine

The use of mineral water bottle blowing machine pay attention to the use of mineral water bottle blowing machine is mainly used for blowing mineral water bottles, it can blow plastic particles or...

Update September 24, 2021

Maintenance of common faults of blow molding machine 7-12.

Fault 7: The bottle clamping line is obvious Reasons: 1. The clamping pressure is not enough; 2. The sealing time is too early; 3. The mold problem; 4. The size of the germ tube tooth mouth does not...